FLOORING GRADE LAMINATES

 

Flooring Grade Laminates are Single Side High Pressure Laminates (HPL) of thickness 1.5 mm and 2.0 mm made of superposed layers of paper, which are impregnated with specially formulated resins and a top sheet of very high abrasive overlay. These are pressed together at 1400 PSI at a temperature of 150-160 Celsius. It can withstand up to 4500 cycles (as against standard 3000 cycles in case of abrasion test). The product conforms to IS 2046 :1995 type S-SDS.
 
  Features
 
  • Very high resistance to surface wears
  • High impact resistance
  • Very high resistance to scratching and all types of staining
  • Fire retardent
  • Highly resistant to scratches and all type of staining
  • Have all anti-static characteristics
  • In built safely features
 
  Size
 
2440 mm x 1220 mm(8' x 4')
 
  Usage
 
  • Recommended for horizontal use
  • Flooring on special substrates
  • Countertops
  • Factory floors
  • Workshops
  • Telephone exchange
  • Modular office floors
  • Assembly lines
  • Tables in electronics industries
 
  Precautions
 
  • Remove all oily substances from the surface of the sections, prior to bonding
  • Use only moisture proof adhesive
  • Formability
    • Recommended minimum temperature 21 degree Celsius
    • Relative Humidity not less than 35% and not more than 80%
  • To prevent cracking, file edges of radium smooth and free it from all cracks and creases
 
  Technical Specification
 
SL. No.
Properties
Unit
Flooring Grade Confirms
1. Thickness 1.5 mm (+- 10%) 3
2. Resistance to Surface Water 350 mm 3
3. Resistance to Immersion in Boiling Water
Increase in Thickness
Mass Increase

7.5 (max)
8.5 (max)

3
3
4. Resistance to Dry Heat at 180°c Should pass test 3
5. Dimensional Stability at Deviated Temperature
Longitudinal
Transversal

0.44 (max)
1.86 (max)

3
3
6. Dimensional Stability at 20°C
Longitudinal
Transversal

0.31 (max)
0.49 (max)

3
3
7. Resistance to impact by small diameter ball 20 N (min) 3
8. Resistance to Scratching 2.0 N (min) 3
9. Resistance to Staining
 		Should pass test
 3
10. Resistance to Colour change in Xenon Light
Wool Standard
in enclosed carbon Arc Light

Should pass test
Should pass test
3
3
11. Resistance to Cigarette Burns Should pass test 3
12. Resistance to Stream Should pass test 3 -
13. Appearance Should be free from foreign particles 3
14. Resistance to Cracking Should pass test 3

Home | Site Map | Contact